Honeywell DL230 Operating Instructions Manual page 92

92
Message
Calibration
lock
Admin lock
Cust. lock o.
Bat. operat.
Dayl.Sav.Tim
Call Win. 1
Call Win. 2
Call Win. 3
Call Win. 4
Call Win. 5
Call Win. 6
Call time 1
Call time 2
Call time 3
Call time 4
Call time 5
Call time 6
Description, process
The calibration lock is open.
During normal operation the calibration lock should be
closed so that no unauthorized changes can be carried
out.
To close the calibration lock please go to
Ctrl.  St.PL
and enter the value "0".
The administrator lock is open.
The customer lock is open.
The DL230 is in battery operation.
This remark is intended primarily to signal to a remote
data readout system, that lengthy data transfers will
cause the batteries to discharge more quickly.
The time displayed on the DL230 is summertime.
The conversion mode can be changed using the pa-
rameterization program "enSuite".
The named call window is active, i.e. the DL230 can
accept data transfer calls.
The named call time is active, i.e. the DL230 calls the
remote terminal for the purpose of data transmission.
Faults