Verifying Assembly And Connection; Data Transfer - Honeywell DL230 Operating Instructions Manual

Assembly, Connection and Putting into Operation

5.3.4 Verifying assembly and connection

WARNING!
Risk as a result of incorrect assembly and connection
Incorrect assembly and connection of the DL230 may lead
to life-threatening situations.
Therefore:
– Assemble and connect the DL230 correctly.
– Sealing should solely be carried out by a calibration
– Follow the guidelines of DIN EN 60079-14,

5.3.5 Data transfer

For the various options available regarding data transmission to a control
centre via the integrated modem then please follow the corresponding
instructions in the DL230 applications manual which can be downloaded
from von http://www.dl230.de/ (DOWNLOADS → Dokumente).
The data transfer settings can be configured without opening the calibration
lock.
officer.
DIN EN 60079-0, the ATEX Product Directive 94/9/EC
as well as the ATEX Operating Directive 1999/92/EC
EN.
51