Idr Display - Honeywell E-Mon IDR Series Installation Instructions Manual

E-MON INTERVAL DATA RECORDER

5.0 IDR DISPLAY

The IDR display allows you to manually enter information into the unit. Four push buttons on the circuit board
that is mounted to the door of the meter are utilized for this function.
The push buttons provide access to entering the time and date, the device ID, and the IP settings. Load control is
not presently available through the IDR.
Pressing the MENU button allows access to the function menu, up and down buttons are used to move the
pointer.
The SELECT button allows entry to each of the functions. Repeated use of this button allows the object selected
to be modified.
The UP and DOWN buttons are used to modify the object that was selected. Once changed, the SELECT button
is used to move to the next object to be modified. When completed, press the MENU button to save the setting
and exit the function.
The display shows the accumulated meter readings and the load reading of each of the input channels. The
input pulse value must be entered through Honeywell E-Mon Energy software.
UP SELECT
DOWN
MENU
M33474
Fig. 6. IDR Display Board.
5.1 Program Mode
9 62-0394—06