Honeywell DL230 Operating Instructions Manual page 2

Table of Contents

Exclusion of liability

The information contained in this document is the property of Honeywell. The

following information may only be used for its intended purpose. This document

or its contents must not be copied, published or made accessible to a third par-

ty in full or in part without the express consent of Elster GmbH.

All specifications and descriptions in these operating instructions have been

compiled following careful testing. In spite of this, errors cannot be completely

ruled out. Honeywell can therefore not provide any guarantee that the content

is complete or correct. The instructions must also not be seen as a warranty of

product features. Furthermore, features are also described here, which are only

available as an option.

Honeywell cannot accept liability in any case for direct, special or consequential

damage suffered by third parties. The information and specifications in this

document may be amended without notice.

In view of extended product liability, the listed data and material proper-

ties should only be regarded as reference values and must always be

checked for each individual case and corrected if necessary. This is es-

pecially the case when safety aspects are affected.

Further support is available from your local branch office or agent. The address

is available on the Internet or from Honeywell.

This manual or parts of it may only be disclosed or copied with written consent

from Honeywell.

If the product described here is improperly handled, repaired or changed by

unauthorized persons or if spare parts other than those supplied by Honeywell

are used, our warranty will be rendered void.

Mainz-Kastel, January 2019

Table of Contents