Replacing A Server Node - Cisco UCS S3260 Service Manual

Installing or Replacing System Components

Replacing a Server Node

The system can support one or two server nodes.
•
•
Note
To replace a server node, including exporting and importing its configuration, see the service note for
your server node:
•
•
•
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
3-26
Cisco IMC releases earlier than 2.0(13): If your S3260 system has only one server node, it must be
installed in bay 1.
Cisco IMC releases 2.0(13) and later: If your S3260 system has only one server node, it can be
installed in either server bay.
Whichever bay a server node is installed to, it must have a corresponding SIOC. That is, a server
node in bay 1 must be paired with a SIOC in SIOC slot 1; a server node in bay 2 must be paired
with a SIOC in SIOC bay 2. See
information.
Cisco UCS C3X60 M3 Server Node For Cisco UCS S3260 System Service Note
Cisco UCS C3X60 M4 Server Node For Cisco UCS S3260 System Service Note
Cisco UCS S3260 M5 Server Node For Cisco UCS S3260 System Service Note
Overview of Cisco UCS S3260 Architecture, page 1-8
Chapter 3 Maintaining the System
for more