Cisco UCS S3260 Service Manual page 26

Installing the System in a Rack
Reversing the Cable Management Arm (Optional)
Rotate the entire CMA assembly 180 degrees. The plastic cable guides must remain pointing upward.
Step 1
Flip the tabs at the end of each CMA arm so that they point toward the rear of the system.
Step 2
Pivot the tab that is at the end of the width-adjustment slider. Depress and hold the metal button on the
Step 3
outside of the tab and pivot the tab 180 degrees so that it points toward the rear of the system.
Figure 2-6
1
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
2-12
Reversing the CMA
2
CMA tab on end of width-adjustment slider
Chapter 2
1
2 Metal button for rotating
Installing the System