Cisco UCS S3260 Service Manual page 38

Status LEDs and Buttons
Rear-Panel LEDs and Buttons
Figure 3-2
C3X60 M4 server node and an optional four-drive expansion module.
LED states.
Figure 3-2
Server node Power button/LED
1
(on each server node)
Server node unit identification button/LED
2
(on each server node)
1 Gb Ethernet port link speed LED
3
(on each M5 server node only)
1 Gb Ethernet port link activity LED
4
(on each M5 server node only)
5 Power supply status LED (each power supply)
6 QSFP port link speed LED (on each port)
Actual ports will vary, depending on which SIOC
version is used, or which adapter card is installed
in a Version 03 SIOC.
7 QSFP port link activity LED (on each port)
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
3-4
shows the rear-panel LEDs and buttons for a S3260 system. This example is shown with a
S3260 System Rear-Panel LEDs and Buttons
8
9
10 10/100/1000 dedicated management port link speed LED
11 Solid state drive activity LED (each drive bay)
12 Solid state drive fault LED (each drive bay)
13 Not used at this time.
14 SIOC health LED (one each Version 03 SIOC only)
Not used at this time.
10/100/1000 dedicated management port link activity LED
(on each SIOC)
(on each SIOC)
Chapter 3 Maintaining the System
Table 3-2 defines the rear-panel