Troubleshooting Network Interfaces; Replacing The Fan Tray; Removing The Fan Tray - Cisco AS5350XM Installation Manual

Chapter 4 Troubleshooting

Troubleshooting Network Interfaces

For information about isolating problems with the network connections to your Cisco AS5350XM
universal gateway, see the Internetwork Troubleshooting Guide publication available on Cisco.com. For
more information, see the section

Replacing the Fan Tray

Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
Before you remove the fan tray, read the
Caution

Removing the Fan Tray

To remove the fan tray, follow this procedure:
Use the power switch on the chassis to power down the chassis.
Step 1
The fan tray is not hot-swappable. You must power down the system before removing the fan tray.
Caution
Step 2 Position the chassis with the front panel facing you. (See
tray.
OL-6417-02
RPS Fan status: normal
RPS Thermal status: normal
RPS OverVoltage status: normal
Environmental monitor experienced the following events:
Temperature:sensor failed.
Fans:monitor dropped.
Temperature:warning.
Temperature:sensor recovered.
Fans:monitor recovered.
Fans:normal.
Temperature:critical.
Temperature:shutdown.
"Obtaining Documentation" section on page
"Safety Recommendations" section on page
Figure 4-3.) The front panel contains the fan
Cisco AS5350XM Universal Gateway Chassis Installation Guide

Troubleshooting Network Interfaces

xiv.
2-1.
4-5