Cisco UCS S3260 Service Manual page 42

Status LEDs and Buttons
Table 3-4 Internal Diagnostic LED States
LED Name
1 SAS drive fault
2 SAS drive activity
3 Fan fault LEDs
Diagnostic LEDs in the Server Node
For the locations of the internal diagnostic LEDs inside the server node, see the service note for your
server node:
•
•
•
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
3-8
State
Off—The drive is operating properly.
•
Amber—This drive has failed.
•
Amber, blinking—The device is rebuilding.
•
Off—There is no drive in the drive tray (no access, no fault).
•
Green—The drive is ready.
•
Green, blinking—The drive is reading or writing data.
•
Off—Component is functioning normally.
•
Amber—Component has failed.
•
Cisco UCS C3X60 M3 Server Node For Cisco UCS S3260 System Service Note
Cisco UCS C3X60 M4 Server Node For Cisco UCS S3260 System Service Note
Cisco UCS S3260 M5 Server Node For Cisco UCS S3260 System Service Note
Chapter 3 Maintaining the System