Cisco UCS S3260 Service Manual page 87

Appendix A System Specifications
Power Specifications
The power specifications for the power supply options are listed in the following sections:
•
•
You can get more specific power information for your exact server configuration by using the Cisco UCS
Power Calculator:
http://ucspowercalc.cisco.com
Do not mix power supply types in the server. Both power supplies must be identical.
Note
The voltage sensor reading via PMBus for the power supplies in all UCS servers has +/- 5% tolerance.
Note
1050 W AC Power Supply (UCSC-PSU1-1050W)
Table A-3
UCSC-PSU1-1050W).
Table A-3
Description
AC input voltage
AC input frequency
Maximum AC input current
Maximum input volt-amperes
Maximum output power per PSU
Maximum inrush current
Maximum hold-up time
Power supply output voltage
Power supply standby voltage
Efficiency rating
Form factor
Input connector
OL-22326-01
1050 W AC Power Supply (UCSC-PSU1-1050W), page A-3
1050 W DC Power Supply (UCSC-PSUV2-1050DC), page A-4
lists the specifications for each 1050 W AC power supply (Cisco part number
1050 W Power Supply Specifications
Specification
Nominal range: 200–240 VAC
(Range: 180–264 VAC)
Nominal range: 50 to 60Hz
(Range: 47–63 Hz)
8.5 A at 200 VAC
1250 VA at 100 VAC
1050 W at 200–240 VAC main power
30W at 200-240 VAC standby power
15 A (sub-cycle duration)
12 ms at 770 W
12 VDC
12 VDC
Climate Savers Platinum Efficiency (80Plus Platinum certified)
RSP2
IEC320 C14
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
Power Specifications
A-3