Cisco UCS S3260 Service Manual page 16

Unpacking and Inspecting the System
Unpacking and Inspecting the System
This system weighs approximately 190 pounds (86 kilograms) when fully loaded with components. We
Caution
recommend that you use a mechanical lift when lifting the system. Attempting this procedure alone
could result in personal injury or equipment damage. Consider removing components such as hard drives
temporarily while you move the system.
When handling internal system components, wear an ESD strap and handle modules by the carrier edges
Caution
only.
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or
Note
any items are missing, contact your customer service representative immediately.
Remove the system from its cardboard container and save all packaging material.
Step 1
Compare the shipment to the equipment list provided by your customer service representative. Verify
Step 2
that you have all items.
Check for damage and report any discrepancies or damage to your customer service representative. Have
Step 3
the following information ready:
•
•
•
•
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
2-2
Invoice number of shipper (see the packing slip)
Model and serial number of the damaged unit
Description of damage
Effect of damage on the installation
Chapter 2 Installing the System