Cisco UCS S3260 Service Manual page 15

Installing the System
This chapter describes how to install the system, and it includes the following sections:
Unpacking and Inspecting the System, page 2-2
•
Preparing for System Installation, page 2-3
•
Installing the System in a Rack, page 2-5
•
Initial System Setup, page 2-13
•
NIC Modes and NIC Redundancy Settings, page 2-19
•
System BIOS and Cisco IMC Firmware, page 2-20
•
Before you install, operate, or service a system, review the
Note
Information for Cisco UCS S-Series Servers
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. Use the statement number provided at
the end of each warning to locate its translation in the translated safety warnings that
accompanied this device.
Statement 1071
C H A P T E R
for important safety information.
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
2
Regulatory Compliance and Safety
2-1