Cisco UCS S3260 Service Manual page 36

Status LEDs and Buttons
Front-Panel LEDs
Figure 3-1
Figure 3-1 Front-Panel LEDs
1
2
3
4
5
6
7
1
2
3
4
Table 3-1 Front-Panel LEDs States
LED Name
1 System Power button/power
status LED
2 System unit identification
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
3-2
shows the front-panel LEDs.
System Power button and power status LED
System unit identification button and LED
System status LED
Fan status LED
State
Off—There is no AC power to the system (all power cords are disconnected).
•
Amber—Both server nodes are powered off. Pressing the button will power on
•
both server nodes.
Green—At least one server node is powered on. Pressing the button will power
•
off both server nodes, returning the LED to amber.
Off—The unit identification LED is not in use.
•
Blue, blinking—The unit identification LED is activated.
•
Table 3-1 defines the front-panel LED states.
Temperature status LED
5
6 Power supply status LED
7 Network link activity LED
8 Internal-drive status LEDs
Chapter 3 Maintaining the System
1
2
8
3
4