Displaying Fspf Interfaces; Default Settings - Cisco MDS 9000 Series Configuration Manual

Displaying FSPF Interfaces

NbrDomainId
-----------------------------------------------------------------------------
0xc3(195) 0x00001085
0xc3(195) 0x00001086
0xc3(195) 0x00001087
0xc3(195) 0x00001084
FSPF Link State Database for VSAN 1 Domain 0xc3(195)
LSR Type
Advertising domain ID
LSR Age
LSR Incarnation number
LSR Checksum
Number of links
NbrDomainId
-----------------------------------------------------------------------------
0x65(101) 0x00001095
0x65(101) 0x00001096
0x65(101) 0x00001097
0x65(101) 0x00001094
Displaying FSPF Interfaces
Displays FSPF Interface Information, on page 204
• Link cost
• Timer values
• Neighbor's domain ID (if known)
• Local interface number
• Remote interface number (if known)
• FSPF state of the interface
• Interface counters
Displays FSPF Interface Information
switch# show fspf vsan 1 interface fc1/1
FSPF interface fc1/1 in VSAN 1
FSPF routing administrative state is active
Interface cost is 500
Timer intervals configured, Hello 20 s, Dead 80 s, Retransmit 5 s
FSPF State is FULL
Neighbor Domain Id is 0x0c(12), Neighbor Interface index is 0x0f100000
Statistics counters :
Number of packets received : LSU
Number of packets transmitted : LSU
Number of times inactivity timer expired for the interface = 0

Default Settings

Table 20: Default FSPF Settings , on page 205
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
204
IfIndex
0x0c(12) 0x00001081
0x0c(12) 0x00001080
= 1
= 0xc3(195)
= 1686
= 0x80000033
= 0x6799
= 4
IfIndex
Configuring Fibre Channel Routing Services and Protocols
NbrIfIndex Link Type
0x00001095
0x00001096
0x00001097
0x00001094
0x0000100e
0x0000100f
NbrIfIndex Link Type
0x00001085
0x00001086
0x00001087
0x00001084
displays the following information for each selected interface.
8 LSA 8 Hello 118
8 LSA 8 Hello 119
lists the default settings for FSPF features.
Cost
1 500
1 500
1 500
1 500
1 500
1 500
Cost
1 500
1 500
1 500
1 500
Error packets 0
Retransmitted LSU 0