Configuring and Managing Zones
Removes the device type configuration for all the members of the zone and fcalias of all the specified zonesets in the
VSAN.
Disabling Smart Zoning at Zone Level in the Basic Zoning Mode
To disable smart zoning at the zone level for a VSAN in basic zoning mode, follow these steps:
Step 1
switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# zone name zone1 vsan 1
Configures a zone name.
Step 3
switch(config-zone)# attribute disable-smart-zoning
Disables Smart Zoning for the selected zone.
Note
This command only disables the smart zoning for the selected zone and does not remove the device type
configurations.
Disabling Smart Zoning at Zone Level for a VSAN in the Enhanced Zoning
Mode
To disable smart zoning at the zone level for a VSAN in enhanced zoning mode, follow these steps:
Step 1
switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# zone-attribute-group name disable-sz vsan 1
Creates an enhanced zone session.
Step 3
switch(config-attribute-group)#disable-smart-zoning
Disables Smart Zoning for the selected zone.
This command only disables the smart zoning for the selected zone and does not remove the device type
Note
configurations.
Step 4
switch(config-attribute-group)# zone name prod vsan 1
Configures a zone name.
Step 5
switch(config-zone)# attribute-group disable-sz
Configures to assign a group-attribute name for the selected zone.
Disabling Smart Zoning at Zone Level in the Basic Zoning Mode
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
99