Configuring Default Zone Qos Priority Attributes Using Fabric Manager; Configuring The Default Zone Policy - Cisco MDS 9000 Series Configuration Manual

Configuring Default Zone QoS Priority Attributes Using Fabric Manager

Removes the QoS priority attribute for the default zone and reverts to default low priority.
Configuring Default Zone QoS Priority Attributes Using Fabric Manager
To configure the QoS priority attributes for a default zone using Fabric Manager, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2
Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Choose Edit > Edit Default Zone Attributes to configure the default zone QoS priority attributes (see
Priority Attributes, on page
Figure 39: QoS Priority Attributes
Step 4 Check the Permit QoS Traffic with Priority check box and set the Qos Priority drop-down menu to low, medium, or
high.
Step 5 Click OK to save these changes.

Configuring the Default Zone Policy

To permit or deny traffic in the default zone using Fabric Manager, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2
Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Choose Edit > Edit Default Zone Attributes to configure the default zone QoS priority attributes.
You see the Modify Default Zone Properties dialog box (see
page 93).
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
92
92).
Figure 40: Modify Default Zone Properties Dialog Box, on
Configuring and Managing Zones
Figure 39: QoS