Cisco MDS 9000 Series Configuration Manual page 315

Configuring FICON
...
Port address 80
Port address 254
Displays All FICON Configuration Files
switch# show ficon vsan 2
Ficon information for VSAN 2
Ficon is enabled
VSAN is active
Host control is Enabled
Host offline control is Enabled
Clock alert mode is Disabled
User alert mode is Disabled
SNMP control is Disabled
Active=Saved is Disabled
Number of implemented ports are 250
Key Counter is 9
FCID last byte is 0
Date/Time is same as system time(Sun Dec 14 01:26:30.273402 1980)
Device Allegiance not locked
Codepage is us-canada
Saved configuration files
IPL
IPLFILE1
Displays the Specified Port Addresses for a FICON Configuration File
switch# show ficon vsan 2 file iplfile1 portaddress 1-7
FICON configuration file IPLFILE1 in vsan 2
Port address 1
Port address 2
Port address 3
...
Port address 7
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port name is P3
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Displaying FICON Configuration File Information
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
293