Cisco MDS 9000 Series Configuration Manual page 65

Configuring and Managing Zones
If there are discrepancies and you click OK, the affected VSANs in the zone databases are cleared. This may
Note
become disruptive if the switch is in use.
Figure 8: Quick Config Wizard
Step 3
Check the check box in the Ports Zoned To column for the port you want to add or remove from a zone. The check box
for the matching port is similarly set. The selected port pair is added or removed from the zone, creating a two-device
zone.
The VSAN drop-down menu provides a filter that enables you to zone only those devices within a selected VSAN.
Step 4 Right-click any of the column names to show or hide a column.
Step 5
Click Next to verify the changes.
You see the Confirm Changes dialog box (see Figure 9: Confirm Changes Dialog Box, on page
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
Using the Quick Config Wizard
44).
43