Default Settings - Cisco MDS 9000 Series Configuration Manual

Default Settings

Step 8
Use the show fcns data vsan command to verify the name server information.
switch# show fcns data vsan 1
VSAN 1:
------------------------------------------------------------------
FCID TYPE
------------------------------------------------------------------
0x610400 N
0x6105dc NL
0x6105e0 NL
0x6105e1 NL
0x6105e2 NL
0x6105e4 NL
0x630400 N
0x630500 N
0x6514e2 NL
0x6514e4 NL
0x6514e8 NL
0x651500 N
Total number of entries = 12
Default Settings
Table 27: Default Settings for Advanced Features , on page 316
in this chapter.
Table 27: Default Settings for Advanced Features
Parameters
CIM server
CIM server security protocol
D_S_TOV
E_D_TOV
R_A_TOV
Timeout period to invoke fctrace
Number of frame sent by the fcping feature
Remote capture connection protocol
Remote capture connection mode
Local capture frame limit s
FC ID allocation mode
Loop monitoring
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
316
PWWN
10:00:00:00:c9:24:3d:90 (Emulex)
21:00:00:20:37:28:31:6d (Seagate)
21:00:00:20:37:28:24:7b (Seagate)
21:00:00:20:37:28:22:ea (Seagate)
21:00:00:20:37:28:2e:65 (Seagate)
21:00:00:20:37:28:26:0d (Seagate)
10:00:00:00:c9:24:3f:75 (Emulex)
50:06:01:60:88:02:90:cb
21:00:00:20:37:a7:ca:b7 (Seagate)
21:00:00:20:37:a7:c7:e0 (Seagate)
21:00:00:20:37:a7:c7:df (Seagate)
10:00:00:e0:69:f0:43:9f (JNI)
(VENDOR) FC4-TYPE:FEATURE
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
scsi-fcp
lists the default settings for the features included
Default
Disabled
HTTP
5,000 milliseconds.
2,000 milliseconds.
10,000 milliseconds.
5 seconds.
5 frames.
TCP.
Passive.
10 frames.
Auto mode.
Disabled.
Advanced Features and Concepts