Displaying The Fspf Database - Cisco MDS 9000 Series Configuration Manual

Configuring Fibre Channel Routing Services and Protocols
Autonomous region is 0
SPF hold time is 0 msec
MinLsArrival = 1000 msec , MinLsInterval = 5000 msec
Local Domain is 0x65(101)
Number of LSRs = 3, Total Checksum = 0x0001288b
Protocol constants :
LS_REFRESH_TIME = 1800 sec
MAX_AGE
Statistics counters :
Number of LSR that reached MaxAge = 0
Number of SPF computations
Number of Checksum Errors
Number of Transmitted packets :
Number of received packets :

Displaying the FSPF Database

Displays FSPF Database Information, on page 203
VSAN. If other parameters are not specified, all LSRs in the database are displayed:
• LSR type
• Domain ID of the LSR owner
• Domain ID of the advertising router
• LSR age
• LSR incarnation member
• Number of links
You could narrow the display to obtain specific information by issuing additional parameters for the domain
ID of the LSR owner. For each interface, the following information is also available:
• Domain ID of the neighboring switch
• E port index
• Port index of the neighboring switch
• Link type and cost
Displays FSPF Database Information
switch# show fspf database vsan 1
FSPF Link State Database for VSAN 1 Domain 0x0c(12)
LSR Type
Advertising domain ID
LSR Age
LSR Incarnation number
LSR Checksum
Number of links
NbrDomainId
-----------------------------------------------------------------------------
0x65(101) 0x0000100e
0x65(101) 0x0000100f
FSPF Link State Database for VSAN 1 Domain 0x65(101)
LSR Type
Advertising domain ID
LSR Age
LSR Incarnation number
LSR Checksum
Number of links
= 3600 sec
= 7
= 0
LSU 65 LSA 55 Hello 474 Retranmsitted LSU 0
LSU 55 LSA 60 Hello 464 Error packets 10
= 1
= 0x0c(12)
= 1686
= 0x80000024
= 0x3caf
= 2
IfIndex NbrIfIndex
0x00001081
0x00001080
= 1
= 0x65(101)
= 1685
= 0x80000028
= 0x8443
= 6
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
displays a summary of the FSPF database for a specified
Link Type Cost
1 500
1 500
Displaying the FSPF Database
203