Cisco MDS 9000 Series Configuration Manual page 94

Adding Members to Aliases
Figure 26: Edit Local Full Zone Database Dialog Box
Step 3
Select the member(s) you want to add from the Fabric pane (see
on page 72) and click Add to Alias or click the alias where you want to add members and click the Insert icon.
You see the Add Member to Alias dialog box (see
Figure 27: Add Member to Alias Dialog Box
Note The Device Alias radio button is visible only if device alias is in enhanced mode. For more information, see
Creating Device Aliases, on page 161
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
72
Figure 26: Edit Local Full Zone Database Dialog Box,
Figure 27: Add Member to Alias Dialog Box, on page
section.
Configuring and Managing Zones
72).