Disabling Zone Server Delta Distribution
switch # configure terminal
Step 2
Enable the distribution of data changes in a zone in enhanced mode:
switch(config)# zone capability mode enhanced distribution diffs-only
Step 3
Display the status of delta distribution (changes in data) in a fabric:
switch(config)# show running | include diffs-only
Example
Enabling Zone Server Delta Distribution
This example shows how to enable distribution of changes in data in a Zone Server:
switch(config)# zone capability mode enhanced distribution diffs-only
Disabling Zone Server Delta Distribution
To disable the distribution of data changes in a zone server, perform the following procedure:
Step 1
Enter the configuration mode:
switch # configure terminal
Step 2
Disable the distribution of data changes in a zone:
switch(config)# no zone capability mode enhanced distribution diffs-only
Example
Disabling Zone Server Delta Distribution
This example shows how to disable distribution of changes in data in a Zone Server:
switch(config)# no zone capability mode enhanced distribution diffs-only
Default Settings
Table lists the default settings for basic zone parameters.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
152
Configuring and Managing Zones