Creating Fc Aliases Using Fabric Manager - Cisco MDS 9000 Series Configuration Manual

Creating FC Aliases Using Fabric Manager

Example:
IPv6 address example:
Example:
switch(config-fcalias)#
Example:
Local sWWN interface example:
Example:
switch(config-fcalias)#
Example:
Remote sWWN interface example:
Example:
switch(config-fcalias)#
Example:
Domain ID interface example:
Example:
switch(config-fcalias)#
Configures a member for the specified fcalias (AliasSample) based on the type (pWWN, fabric pWWN, FC ID, domain
ID, IPv4 address, IPv6 address, or interface) and value specified.
Multiple members can be specified on multiple lines.
Note
Creating FC Aliases Using Fabric Manager
To create an FC alias using Fabric Manager, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2
Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Click Aliases in the lower left pane (see
aliases.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
70
member ipv6-address 2001::db8:800:200c:417a/64
member interface fc 2/1
member interface fc2/1 swwn 20:00:00:05:30:00:4a:de
member interface fc2/1 domain-id 25
Figure 24: Creating an FC Alias, on page
Configuring and Managing Zones
71). The right pane lists the existing