Verifying Fibre Channel Interfaces Configuration; Displaying Fec Module Interfaces - Cisco MDS 9000 Series Configuration Manual

Interface
Hide thumbs Also See for MDS 9000 Series:
Table of Contents

Advertisement

Verifying Fibre Channel Interfaces Configuration

Verifying Fibre Channel Interfaces Configuration
To display Fibre Channel interface configuration information, perform one of the following tasks:
Command
show module
show module slot recovery-steps
show port-resources module slot
show interface fc slot/port
show interface brief
show port index-allocation
show port index-allocation startup
show port-channel compatibility parameters
show module slot bandwidth-fairness
For detailed information about the fields in the output from these commands, refer to the
Series Command

Displaying FEC Module Interfaces

This example shows a 32-Gbps FC interface status:
Note
36-gigabit FC ports comes up automatically in FEC and need not be configured.
switch# show interface fc 10/21 brief
--------------------------------------------------------------------------------
---------
Interface
--------------------------------------------------------------------------------
fc10/21
switch# show interface fc10/21
fc10/21 is trunking
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
104
Reference.
Vsan
Admin
Admin
Mode
Trunk
Mode
1
auto
on
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 22:55:54:7f:ee:ea:1f:00
Peer port WWN is 22:24:54:7f:ee:ea:1d:00
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Purpose
Displays the module.
Displays the slot for the module.
Displays the port resources for the slot.
Displays the slot or port information. FEC admin and
operational states are displayed.
Displays the interface.
Displays the port in the index allocation.
Displays the startup port in the index allocation.
Displays the PortChannel compatibility parameters.
Displays the module slot bandwidth fairness information.
Status
SFP
Oper
Mode
trunking
swl
TE
Configuring Fibre Channel Interfaces
Cisco MDS 9000
Oper
Port
Logical
Speed
Channel
Type
(Gbps)
32
--
core

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents