Cisco MDS 9000 Series Configuration Manual page 74

Autozone Example Scenario
7. Verify the pending zone configurations using the autozone --showpending command:
switch# autozone --showpending
Feature AutoZone : Enabled
zoneset name AUTOZONESET vsan 1
8. (Optional) You can execute Autozone manually for updating the zoning information each time a new
device is logged into the switch using the autozone --update command:
switch# autozone --update
Device with pwwn 10:00:00:de:fb:74:e8:31 is not registered with FC4-type Init or Target.
Hence, it will be ignored for AutoZone configuration.
Configuring zones for vsan 1
Configuring zoneset for vsan 1
Activating the zoneset. Please wait...
Configured zoneset AUTOZONESET for vsan 1 successfully.
9. Verify the zone configuration for the new devices using the autozone --show command:
switch# autozone --show
Feature AutoZone : Enabled
The possible zone/zoneset configuration with AutoZone feature for currently logged-in
devices are :
zoneset name AUTOZONESET vsan 1
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
52
zone name AUTOZONE_JPG21190082_2 vsan 1
member pwwn 20:00:00:11:0d:97:00:01
member pwwn 20:01:00:11:0d:97:01:00
zone name AUTOZONE_JPG21190082_3 vsan 1
member pwwn 20:00:00:11:0d:97:00:00
member pwwn 20:01:00:11:0d:97:01:01
zone name AUTOZONE_JPG21190082_4 vsan 1
member pwwn 20:00:00:11:0d:97:00:01
member pwwn 20:01:00:11:0d:97:01:01
AUTOZONE_JPG21190082_1
AUTOZONE_JPG21190082_2
AUTOZONE_JPG21190082_3
AUTOZONE_JPG21190082_4
zone name AUTOZONE_JPG21190082_1 vsan 1
member pwwn 20:00:00:11:0d:97:00:00
member pwwn 20:01:00:11:0d:97:01:00
zone name AUTOZONE_JPG21190082_2 vsan 1
member pwwn 20:00:00:11:0d:97:00:01
member pwwn 20:01:00:11:0d:97:01:00
zone name AUTOZONE_JPG21190082_3 vsan 1
member pwwn 20:00:00:11:0d:97:00:00
member pwwn 20:01:00:11:0d:97:01:01
zone name AUTOZONE_JPG21190082_4 vsan 1
member pwwn 20:00:00:11:0d:97:00:01
member pwwn 20:01:00:11:0d:97:01:01
Configuring and Managing Zones