Default Settings; Displaying Fabric Switch Information - Cisco MDS 9000 Series Configuration Manual

Configuring and Managing VSANs
Displays the VSAN Usage
switch# show vsan usage
4 vsan configured
configured vsans:1-4
vsans available for configuration:5-4093
Displays All VSANs
switch# show vsan
vsan 1 information
vsan 2 information
vsan 7 information
vsan 100 information
vsan 4094:isolated vsan

Default Settings

Table 3: Default VSAN Parameters , on page 19
Table 3: Default VSAN Parameters
Parameters
Default VSAN
State
Name
Load-balancing attribute

Displaying Fabric Switch Information

Use the show fabric switch information vsan command to display information about each switch in the
fabric in the given VSAN.
name:VSAN0001 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
name:VSAN0002 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
name:VSAN0007 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
name:VSAN0100 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
Default
VSAN 1.
Active state.
Concatenation of VSAN and a four-digit string representing the VSAN ID. For
example, VSAN 3 is VSAN0003.
OX ID (src-dst-ox-id).
lists the default settings for all configured VSANs.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
Default Settings
19