Xconfiguration Cameras Camera [1] Whitebalance Mode; Xconfiguration Cameras Camera [1] Whitebalance Level; Conference Configuration; Xconfiguration Conference Autoanswer Mode - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xConfiguration Cameras Camera [1] Whitebalance Mode

Define the camera white balance mode.
Requires user role: ADMIN, USER
Default value: Auto
USAGE:
xConfiguration Cameras Camera n
where
n
: Unique ID that identifies the camera. Range: 1..1
Mode
: Auto/Manual
Auto: The camera will continuously adjust the white balance depending on the camera
view.
Manual: Enables manual control of the camera white balance. The white balance level is
set using the Cameras Camera [n] Whitebalance Level setting.

xConfiguration Cameras Camera [1] Whitebalance Level

Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be set
to manual.
Requires user role: ADMIN, USER
Default value: 1
USAGE:
xConfiguration Cameras Camera n
where
n
: Unique ID that identifies the camera. Range: 1..1
Level
: Integer (1..16)
The white balance level.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration
Whitebalance Mode: Mode
Whitebalance Level: Level
xCommand

Conference configuration

xConfiguration Conference AutoAnswer Mode

Define the auto answer mode. Use the Conference AutoAnswer Delay setting if you want
the system to wait a number of seconds before answering the call, and use the Conference
AutoAnswer Mute setting if you want your microphone to be muted when the call is answered.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Conference AutoAnswer Mode:
where
Mode
: Off/On
Off: You must answer incomming calls manually by pressing the OK key or the green
Call key on the remote control, or by tapping Answer on the Touch controller.
On: The system automatically answers incoming calls, except if you are already in a
call. You must always answer or decline incoming calls manually when you are already
engaged in a call.

xConfiguration Conference AutoAnswer Mute

Define if the microphone shall be muted when an incoming call is automatically answered.
Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Conference AutoAnswer Mute:
where
Mute
: Off/On
Off: The incoming call will not be muted.
On: The incoming call will be muted when automatically answered.
52
API Reference Guide
xStatus Appendices
Mode
Mute
Copyright © 2016 Cisco Systems, Inc. All rights reserved.