Cameras Camera [1] Gamma Level; Cameras Camera [1] Mirror; Cameras Camera [1] Whitebalance Level; Cameras Camera [1] Whitebalance Mode - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction

Cameras Camera [1] Gamma Level

By setting the Gamma Level you can select which gamma correction table to use. This
setting may be useful in difficult lighting conditions, where changes to the brightness setting
does not provide satisfactory results. Requires the Cameras Camera [n] Gamma Mode to be
set to Manual.
Requires user role: USER
Default value: 0
Value space: Integer (0..7)
Define the gamma level.

Cameras Camera [1] Mirror

With Mirror mode (horizontal flip) you can mirror the image on screen. Mirroring applies
both to the self-view and the video that is transmitted to the far end
Requires user role: USER
Default value: Off
Value space: Off/On
Off: Display the image as other people see you.
On: Display the image as you see yourself in a mirror.

Cameras Camera [1] Whitebalance Mode

Define the camera white balance mode.
Requires user role: USER
Default value: Auto
Value space: Auto/Manual
Auto: The camera will continuously adjust the white balance depending on the camera
view.
Manual: Enables manual control of the camera white balance. The white balance level is
set using the Cameras Camera [n] Whitebalance Level setting.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals Maintenance

Cameras Camera [1] Whitebalance Level

Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be
set to manual.
Requires user role: USER
Default value: 1
Value space: Integer (1..16)
The white balance level.

Cameras PowerLine Frequency

The video system's camera is able to compensate for any flicker noise from the electrical
power supply (power line frequency anti-flickering). The camera also supports auto
detection of line frequency. Select the Auto option (default), or set this camera configuration
based on your power line frequency.
Requires user role: ADMIN
Default value: Auto
Value space: 50Hz/60Hz/Auto
50Hz: Use this value when the power line frequency is 50 Hz.
60Hz: Use this value when the power line frequency is 60 Hz.
Auto: Allow the camera to detect the power frequency automatically.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
67
Administrator Guide
System settings System settings Appendices