Cisco Prisma II Installation And Operation Manual page 89

Checking bdr Transmit Processor Alarms,
Alarms Limits
Alarms limits fall into one of the following categories.
• Major low
• Minor low
• Minor high
• Major high
Checking Alarms
To check a parameter's alarm status, perform these steps.
1. Access the Device Details window. The alarms are shown under Parameters
and Alarms.
2. If any of the parameters are in alarm, take the corrective action you deem
necessary.
4-22
Continued
Operation Using the LCI Software 78-715192-01 Rev C