Cisco Prisma II Installation And Operation Manual page 43

The ICIM Password,
Using Your Password for the First Time
Important: To enter a User password in an ICIM that has never had the User
password function implemented, follow the steps in the procedure below.
1. Access the password function as shown in Accessing the ICIM Password
Function.
2.
Use the
3.
Press the
4.
Press the
password, using the 0-9 number keys. If at any time you input a digit that is
incorrect or you wish to change a digit, use the CAN (Cancel) function by
pressing the
5.
Press the
entry was accepted or rejected. If the entry was accepted, you are able to
return to the MAIN menu.
If the password you entered is rejected, press the
6.
password function, then re-enter an 8-digit password using only the 0-9
number keys. Press the
Reasons for a User password to be rejected include:
Entering more than 8 digits for the password
•
Pressing keys other than the 0-9 number keys
•
• Entering an incorrect password if a valid password has been entered
3-8
Continued
key to scroll down until Change Psw is highlighted.

key. Change Psw/Shift Off is displayed.
SEL
key to display Shift On - then enter 8 digits as your User
SHIFT
ALRM
key to delete that digit.
key. The ICIM updates the display to show if your password
ENTER
key.
ENTER
Operation Using the ICIM
key to return to the
SHIFT
78-715192-01 Rev C