Cisco Prisma II Installation And Operation Manual page 52

Monitoring Operating Status Using the ICIM,
Parameter
NoiseSup
RednMode
Laser1
Laser2
RFDriveA
RFDriveB
78-715192-01 Rev C
Units Function
ON or Displays status of noise suppression.
OFF
YES or Redundant mode. When YES, the module will
NO generate an alarm if either transmitter is removed.
Enable/ Status of transmitter 1 (top).
Disable
Enable/ Status of transmitter 2 (bottom).
Disable
dB Displays the amount of RF attenuation on channel A.
dB Displays the amount of RF attenuation on channel B.
Operation Using the ICIM
Continued
3-17