Cisco Prisma II Installation And Operation Manual page 44

The ICIM Password,
Re-Entering a User Password
If more than 10 minutes has passed since your last keystroke, and you attempt to
make any changes to system parameters, the menu displays Psw Expired. If you
attempt to disable the password, the menu displays Failed, Password Not Active.
When either of these messages is displayed, you must re-enter the User password as
outlined in the steps below.
1. Access the password as described in Accessing the Password Function.
2.
Press the
3.
Press the
password, using the 0-9 number keys. If at any time you input a digit that is
incorrect or you wish to change a digit, use the CAN (Cancel) function by
pressing the
4.
Press the
entry was accepted or rejected. If the entry was accepted, you are able to
return to the MAIN menu.
If the password you entered is rejected, press the
5.
password function, then re-enter your password. Press the
Reasons for a User password to be rejected include:
Entering more than 8 digits for the password
•
• Pressing keys other than the 0-9 number keys
Entering an incorrect password if a valid password has been entered
•
I C I M
- - - - - - - - - -
S h e l f
S l o t
- - - - - - - - - -
U s e r P s w
- - - - - - - - - -
S h i f t
78-715192-01 Rev C
Continued
key. User Psw/Shift Off is displayed.
SEL
key to display Shift On - then enter the 8 digits of the User
SHIFT
ALRM
key to delete that digit.
key. The ICIM updates the display to show if your password
ENTER
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
U s e r P s w
* * * * * * * *
- - - - - - - - - -
O f f S h i f t
Operation Using the ICIM
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
U s e r P s w
1 2 3 4 * * * *
- - - - - - - - - -
R e j e c t e d
O n S h i f t
key to return to the
SHIFT
key.
ENTER
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
U s e r P s w
1 2 3 4 5 6 7 8
- - - - - - - - - -
A c c e p t e d
O f f S h i f t
7
1 5
O f f
3-9