Installing Lci - Cisco Prisma II Installation And Operation Manual

Installing LCI

Introduction
This section describes how to install the LCI software.
Installing the LCI Software
To install the LCI software, follow these steps.
1. Close all programs that are running on your computer.
2. Insert the LCI CD-ROM into your CD-ROM drive.
Result: The LCI Installation program starts automatically. If the installation
program does not start automatically, double-click the file setup.exe on the
LCI CD-ROM.
3. Click Next.
Result: The License Agreement screen displays.
78-715192-01 Rev C Operation Using the LCI Software 4-5