Compliance - Cisco Prisma II Installation And Operation Manual

Compliance

Laser and Electrical Safety
UL 1419:1997: A sample of this equipment has been tested and found to meet the
requirements of UL 1419:1997
CSA C22.2 No. 1:1998: A sample of this equipment has been tested and found to
meet the requirements of CSA C22.2 No. 1:1998.
21 CFR: A sample of this equipment has been tested and found to meet the
requirements of 21 CFR chapter 1, subchapter J.
Electromagnetic Compatibility
FCC Part 15 Subpart B: This equipment has been tested and found to comply with
the limits for a Class A digital device according to Part 15 of FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Industry Canada ICES-003: This Class A digital apparatus meets all the
requirements of the Canadian Interference-Causing Equipment Regulations.
Industrie Canadienne ICES-003: Cet appareil numèrique de la class A respecte
toutes les exigences du Règlement sur le matèriel brouilleur du Canada.
78-715192-01 Rev C vii