Overview Of The Bdr Transmit Processor - Cisco Prisma II Installation And Operation Manual

Overview of the bdr Transmit Processor

bdr Transmit Processor Overview
The Prisma II optical network is an advanced transmission system designed to
optimize network architectures and increase reliability, scalability, and cost
effectiveness. The Prisma II bdr 2:1 Redundant Transmit Processor is designed to
operate over a range of optical output powers and loss budgets, delivering both
analog and digital signals. Microprocessor control allows ease of installation and
flexibility of application. The Prisma II bdr 2:1 Redundant Transmit Processor
houses up to two bdr transmitter sub-modules.
bdr Transmit Processor Features
The Prisma II bdr 2:1 Redundant Transmit Processor has the following features.
Front panel green LED to indicate operating status
•
Front panel red LED to indicate alarm status
•
-20 dB A/D converter input test points
•
Two bdr transmitter sub-module insertion slots
•
• Plug-and-play capability
• Compatible with Cisco LCI and TNCS software
• Blind mate RF connections
1-2 Introduction 78-715192-01 Rev C