Xconfiguration Sip Proxy [1; Xconfiguration Sip Turn Server; Xconfiguration Sip Turn Username; Xconfiguration Sip Turn Password - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction
xConfiguration SIP Proxy [1..4] Address
The Proxy Address is the manually configured address for the outbound proxy. It is possible to
use a fully qualified domain name, or an IP address. The default port is 5060 for TCP and UDP
but another one can be provided.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Proxy n Address: "Address"
where
n
: Index that identifies the proxy (maximum 4 proxys can be defined). Range: 1..4
Address
: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.

xConfiguration SIP Turn Server

Define the address of the TURN (Traversal Using Relay NAT) server. It is used as a media relay
fallback and it is also used to discover the endpoint's own public IP address.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Turn Server: "Server"
where
Server
: String (0, 255)
The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid
IPv4 or IPv6 address.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration xCommand

xConfiguration SIP Turn UserName

Define the user name needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Turn UserName: "UserName"
where
UserName
: String (0, 128)
A valid user name.

xConfiguration SIP Turn Password

Define the password needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Turn Password: "Password"
where
Password
: String (0, 128)
A valid password.

xConfiguration SIP URI

The SIP URI (Uniform Resource Identifier) is the address that is used to identify the video
system. The URI is registered and used by the SIP services to route inbound calls to the system.
The SIP URI syntax is defined in RFC 3261.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP URI: "URI"
where
URI
: String (0, 255)
An address (URI) that is compliant with the SIP URI syntax.
80
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.