Cisco TelePresence SX10
Introduction
xConfiguration H323 NAT Address
Define the external/global IP address to the router with NAT support. Packets sent to the
router will then be routed to the system. Note that NAT cannot be used when registered to a
gatekeeper.
In the router, the following ports must be routed to the system's IP address:
* Port 1720
* Port 5555-6555
* Port 2326-2487
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration H323 NAT Address: "Address"
where
Address
: String (0, 64)
A valid IPv4 address or IPv6 address.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xConfiguration
xCommand
Network configuration
xConfiguration Network [1] DNS Domain Name
The DNS Domain Name is the default domain name suffix which is added to unqualified names.
Example: If the DNS Domain Name is "company.com" and the name to lookup is
"MyVideoSystem", this will result in the DNS lookup "MyVideoSystem.company.com".
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network
n
DNS Domain Name: "Name"
where
n
: Index that identifies the network. Range: 1..1
Name
: String (0, 64)
The DNS domain name.
xConfiguration Network [1] DNS Server [1..3] Address
Define the network addresses for DNS servers. Up to three addresses may be specified. If the
network addresses are unknown, contact your administrator or Internet Service Provider.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network
DNS Server
n
where
n
: Index that identifies the network. Range: 1..1
m
: Index that identifies the DNS server. Maximum three DNS servers are allowed. Range: 1..3
Address
: String (0, 64)
A valid IPv4 address or IPv6 address.
58
API Reference Guide
xStatus
Appendices
Address: "Address"
m
Copyright © 2016 Cisco Systems, Inc. All rights reserved.