Cisco TelePresence SX10
Introduction
xCommand Audio Volume Set
Set the volume on the endpoint to a specified level.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Set [: ] Level:
where
: Internal/HeadsetAnalog/HeadsetUSB/HandsetUSB
Set the internal volume or the volume on an analog headset (DX70 only) or a USB
headset or handset.
Level: Integer (0..100)
Select gain level. The default level 70 equals 0dB gain. Level 100 equals 15db gain.
xCommand Audio Volume SetToDefault
Set the current volume level as the default for the endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume SetToDefault [: ]
where
: Internal/HeadsetAnalog/HeadsetUSB/HandsetUSB
Set the current volume as the default internal volume or the default volume on an analog
headset (DX70 only) or a USB headset or handset.
xCommand Audio Volume Unmute
Set the volume on the endpoint back on after muting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Unmute
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
Level
xCommand
xCommand
xCommand Audio VuMeter Start
Start VuMeter on the specified connector. The VuMeter measures the input level for
frequencies below 20 kHz.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Start [: ] [: ]
where
: Integer(1..8)
The ID number of the connector.
: HDMI/Line/Microphone
Add description.
xCommand Audio VuMeter Stop
Stop VuMeter on the specified connector.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Stop [: ] [: ]
where
: Integer(1..8)
The ID number of the connector.
: HDMI/Line/Microphone
Add description.
xCommand Audio VuMeter StopAll
Stop all VuMeters.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter StopAll
99
API Reference Guide
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.