Xconfiguration Usermanagement Ldap Attribute; Video Configuration; Xconfiguration Video Defaultmainsource; Xconfiguration Video Input Connector [1..3] Cameracontrol Mode - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xConfiguration UserManagement LDAP Attribute

The attribute used to map to the provided username. If not set, sAMAccountName is used.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Attribute: "Attribute"
where
Attribute
: String (0, 255)
The attribute name.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration xCommand

Video configuration

xConfiguration Video DefaultMainSource

Define which video input source shall be used as the main video source.
Requires user role: ADMIN, USER
Default value: 1
USAGE:
xConfiguration Video DefaultMainSource:
where
DefaultMainSource
: 1
Set the source to be used as the main video source.

xConfiguration Video Input Connector [1..3] CameraControl Mode

Define whether the camera that is connected to this video input connector can be controlled or
not.
Note that camera control is not available for Connector 2 (HDMI) and Connector 3 (VGA).
Requires user role: ADMIN
Default value: Connector 1: On Connector 2,3: Off
USAGE:
xConfiguration Video Input Connector
where
n
: Unique ID that identifies the video input connector. Range: 1..3
Mode
: Connector 1: Off/On Connector 2,3: Off
Off: Disable camera control.
On: Enable camera control.
88
API Reference Guide
xStatus Appendices
DefaultMainSource
CameraControl Mode:
n Mode
Copyright © 2016 Cisco Systems, Inc. All rights reserved.