Xconfiguration Standby Wakeupaction; Systemunit Configuration; Xconfiguration Systemunit Name - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xConfiguration Standby WakeupAction

Define the camera position when leaving standby mode.
Requires user role: ADMIN
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby WakeupAction:
where
WakeupAction
: None/RestoreCameraPosition/DefaultCameraPosition
None: No action.
RestoreCameraPosition: When the video system leaves standby, the camera returns to
the position that it had before entering standby.
DefaultCameraPosition: When the video system leaves standby, the camera moves to
the factory default position.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration
WakeupAction
xCommand

SystemUnit configuration

xConfiguration SystemUnit Name

Define the system name. The system name will be sent as the hostname in a DHCP request
and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SystemUnit Name: "Name"
where
Name
: String (0, 50)
Define the system name.
82
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.