Userinterface Configuration; Xconfiguration Userinterface Contactinfo Type; Xconfiguration Userinterface Keytones Mode; Xconfiguration Userinterface Language - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

UserInterface configuration

xConfiguration UserInterface ContactInfo Type

Choose which type of contact information to show in the status field in the upper left corner of
the display and Touch controller.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration UserInterface ContactInfo Type:
where
Type
: Auto/None/IPv4/IPv6/SipUri/SystemName/DisplayName
Auto: Show the address which another system can dial to reach this system. The
address depends on the system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).

xConfiguration UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when pressing a
key on the remote control, or when typing text or numbers on the Touch controller.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration UserInterface KeyTones Mode:
where
Mode
: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration
Type
Mode
xCommand

xConfiguration UserInterface Language

Select the language to be used in menus and messages on the screen and Touch controller.
Requires user role: ADMIN, USER
Default value: English
USAGE:
xConfiguration UserInterface Language:
where
Language
: English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/Dutch/
Finnish/French/FrenchCanadian/German/Hungarian/Italian/Japanese/Korean/Norwegian/
Polish/PortugueseBrazilian/Russian/Spanish/Swedish/Turkish/Arabic/Hebrew
Select a language from the list.

xConfiguration UserInterface OSD Output

Define on which monitor the on-screen menus, information and indicators (OSD) should be
displayed. The system supports only one monitor, so this value is fixed and cannot be changed.
Requires user role: ADMIN
Default value: 1
USAGE:
xConfiguration UserInterface OSD Output:
where
Output
: 1
85
API Reference Guide
xStatus Appendices
Language
Output
Copyright © 2016 Cisco Systems, Inc. All rights reserved.