Cameras Camera [1..7] Whitebalance Mode; Cameras Powerline Frequency; Cameras Presentertrack Cameraposition Pan; Cameras Presentertrack Cameraposition Tilt - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Cameras Camera [1..7] Whitebalance Mode

Define the camera white balance mode.
Requires user role: ADMIN, USER
Default value: Auto
Value space: Auto/Manual
Auto: The camera will continuously adjust the white balance depending on the camera
view.
Manual: Enables manual control of the camera white balance. The white balance level is
set using the Cameras Camera [n] Whitebalance Level setting.
Cameras Camera [1..7] Whitebalance Level
Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be
set to manual.
Requires user role: ADMIN, USER
Default value: 1
Value space: Integer (1..16)
The white balance level.

Cameras PowerLine Frequency

If your camera supports power line frequency anti-flickering, the camera is able to
compensate for any flicker noise from the electrical power supply. You should set this
camera configuration based on your power line frequency. If your camera supports auto
detection of line frequency, you can select the Auto option in the configuration.
All Cisco Precision cameras support both anti-flickering and auto detection of line
frequency. Auto is the default value, so you should change this setting if you have a camera
that does not support auto detection.
Requires user role: ADMIN
Default value: Auto
Value space: 50Hz/60Hz/Auto
50Hz: Use this value when the power line frequency is 50 Hz.
60Hz: Use this value when the power line frequency is 60 Hz.
Auto: Allow the camera to detect the power frequency automatically.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Maintenance

Cameras PresenterTrack CameraPosition Pan

This setting applies only when using a Cisco TelePresence SX80 with Precision 60 camera
or SpeakerTrack 60 camera.
Define the pan position which the presenter tracking camera will move to when the feature
is activated.
Requires user role: ADMIN, USER
Default value: 0
Value space: Integer (-65535..65535)
The pan position.

Cameras PresenterTrack CameraPosition Tilt

This setting applies only when using a Cisco TelePresence SX80 with Precision 60 camera
or SpeakerTrack 60 camera.
Define the tilt position which the presenter tracking camera will move to when the feature is
activated.
Requires user role: ADMIN, USER
Default value: 0
Value space: Integer (-65535..65535)
The tilt position.

Cameras PresenterTrack CameraPosition Zoom

This setting applies only when using a Cisco TelePresence SX80 with Precision 60 camera
or SpeakerTrack 60 camera.
Define the zoom position which the presenter tracking camera will move to when the
feature is activated.
Requires user role: ADMIN, USER
Default value: 0
Value space: Integer (-65535..65535)
The zoom position.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
98
Administrator Guide
System settings System settings Appendices