Xstatus Peripherals Connecteddevice [N] Softwareinfo; Xstatus Peripherals Connecteddevice [N] Status; Xstatus Peripherals Connecteddevice [N] Type; Xstatus Peripherals Connecteddevice [N] Upgradestatus - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xStatus Peripherals ConnectedDevice [n] SoftwareInfo

Shows information of the software version running on the connected device.
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 SoftwareInfo
*s Peripherals ConnectedDevice 1007 SoftwareInfo: "TI7.2.0"
** end

xStatus Peripherals ConnectedDevice [n] Status

Shows peripheral devices that are currently connected to the endpoint.
Value space of the result returned:
Connected/ResponseTimedOut
Example:
xStatus Peripherals ConnectedDevice 1001 Status
*s Peripherals ConnectedDevice 1001 Status: Connected
** end

xStatus Peripherals ConnectedDevice [n] Type

Shows the peripheral types that are connected to the endpoint.
Note: The value space Camera only shows Precision 60 cameras.
Value space of the result returned:
Byod/Camera/ControlSystem/ISDNLink/Other/SpeakerTrack/TouchPanel
Example:
xStatus Peripherals ConnectedDevice 1001 Type
*s Peripherals ConnectedDevice 1001 Type: TouchPanel
** end
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xCommand

xStatus Peripherals ConnectedDevice [n] UpgradeStatus

Shows the status of the previous software upgrade on the currently connected peripherals.
Value space of the result returned:
Downloading/Failed/Installing/InstallationReady/None/Succeeded/Rebooting/Retrying/
Aborted/Paused
Example:
xStatus Peripherals ConnectedDevice 1001 UpgradeStatus
*s Peripherals ConnectedDevice 1001 UpgradeStatus: None
** end
159
API Reference Guide
xStatus xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.