Peripherals Configuration; Xconfiguration Peripherals Profile Cameras; Xconfiguration Peripherals Profile Touchpanels; Phonebook Configuration - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

Peripherals configuration

xConfiguration Peripherals Profile Cameras

Define the number of cameras that are expected to be connected to the video system. This
information is used by the video system's diagnostics service. If the number of connected
cameras does not match this setting, the diagnostics service will report it as an inconsistency.
Requires user role: ADMIN
Default value: Minimum1
USAGE:
xConfiguration Peripherals Profile Cameras:
where
Cameras
: NotSet/Minimum1/0/1/2/3/4/5/6/7
NotSet: No camera check is performed.
Minimum1: At least one camera should be connected to the video system.
0-7: Select the number of cameras that are expected to be connected to the video
system.

xConfiguration Peripherals Profile TouchPanels

Define the number of touch panels that are expected to be connected to the video system.
This information is used by the video system's diagnostics service. If the number of connected
touch panels does not match this setting, the diagnostics service will report it as an
inconsistency. Note that only one Cisco Touch controller is supported in this version.
Requires user role: ADMIN
Default value: NotSet
USAGE:
xConfiguration Peripherals Profile TouchPanels:
where
TouchPanels
: NotSet/Minimum1/0/1/2/3/4/5
NotSet: No touch panel check is performed.
Minimum1: At least one touch panel should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the
video system.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration
Cameras
TouchPanels
xCommand

Phonebook configuration

xConfiguration Phonebook Server [1] ID

Define a name for the external phone book.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Phonebook Server
where
n
: Unique ID that identifies the phonebook server. Range: 1..1
ID
: String (0, 64)
The name for the external phone book.

xConfiguration Phonebook Server [1] Type

Select the phonebook server type.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Phonebook Server
where
n
: Unique ID that identifies the phonebook server. Range: 1..1
Type
: Off/CUCM/Spark/TMS/VCS
Off: Do not use a phonebook.
CUCM: The phonebook is located on the Cisco Unified Communications Manager.
Spark: The phonebook is located on Spark.
TMS: The phonebook is located on the Cisco TelePresence Management Suite server.
VCS: The phonebook is located on the Cisco TelePresence Video Communication
Server.
72
API Reference Guide
xStatus Appendices
n ID: "ID"
n Type: Type
Copyright © 2016 Cisco Systems, Inc. All rights reserved.