Xconfiguration Provisioning Externalmanager Path; Xconfiguration Provisioning Externalmanager Domain; Proximity Configuration; Xconfiguration Proximity Mode - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xConfiguration Provisioning ExternalManager Path

Define the Path to the external manager / provisioning system. This setting is required when
several management services reside on the same server, i.e. share the same External Manager
address.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Path: "Path"
where
Path
: String (0, 255)
A valid path to the external manager or provisioning system.

xConfiguration Provisioning ExternalManager Domain

Define the SIP domain for the VCS provisioning server.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Domain: "Domain"
where
Domain
: String (0, 64)
A valid domain name.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration xCommand

Proximity configuration

xConfiguration Proximity Mode

Determine whether the video system will emit ultrasound pairing messages or not.
When the video system emits ultrasound, Proximity clients can detect that they are close to the
video system. In order to use a client, at least one of the Proximity services must be enabled
(refer to the Proximity Services settings). In general, Cisco recommends enabling all the
Proximity services.
Requires user role: ADMIN, USER
Default value: Off
USAGE:
xConfiguration Proximity Mode:
where
Mode
: Off/On
Off: The video system does not emit ultrasound, and Proximity services cannot be used.
On: The video system emits ultrasound, and Proximity clients can detect that they are
close to the video system. Enabled Proximity services can be used.

xConfiguration Proximity Services CallControl

Enable or disable basic call control features on Proximity clients. When this setting is enabled,
you are able to control a call using a Proximity client (for example dial, mute, adjust volume and
hang up). This service is supported by mobile devices (iOS and Android). Proximity Mode must
be On for this setting to take any effect.
Requires user role: ADMIN, USER
Default value: Disabled
USAGE:
xConfiguration Proximity Services CallControl:
where
CallControl
: Enabled/Disabled
Enabled: Call control from a Proximity client is enabled.
Disabled: Call control from a Proximity client is disabled.
76
API Reference Guide
xStatus Appendices
Mode
CallControl
Copyright © 2016 Cisco Systems, Inc. All rights reserved.