Table of Contents
Advertisement
How to Configure the Computer
You can configure many parameters on the computer such as the bar code symbologies
it decodes or the network settings. The values you set for these parameters determine
how the computer operates.
There are several ways to configure the computer:
•
•
•
You can also configure the computer with configuration bundles that you create using
SmartSystems Foundation. For more information, see the SmartSystems Foundation
Online Help.
Use Intermec Settings on the Computer
Use Intermec Settings to configure parameters for applications on the computer as well
as some device-specific parameters like volume. You can configure parameters for
important functions like data collection and communications.
External bar code scanners are supported by connecting the scanner to a USB port,
COM port, or by Bluetooth. When configuring a scanner using Intermec Settings, the
scanner symbologies can be updated through the CV41 data collection software.
Start Intermec Settings
Intermec Settings is located in the Control Panel.
1. Tap Start > Control Panel.
2. If you are in Category View, tap Switch to Classic View.
3. Tap Intermec Settings. The Intermec Settings Main Menu appears.
36
Directly on the computer. You can use Intermec Settings directly on the computer to
change only the settings on that computer. For more information, see the next
section..
Remotely using SmartSystems Foundation. When you use SmartSystems, you can
remotely configure all of your CV41 vehicle mount computers as well as other
SmartSystems-enabled Honeywell computers and peripherals. For more
information, see
Use Intermec Settings Remotely With SmartSystems
You can use a third-party device management product that supports the computer
and Intermec Settings, such as Soti MobiControl or Wavelink Avalanche. For more
information, visit the Device Management page on the Honeywell website.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Foundation.
Advertisement
Table of Contents
