Stack Management
System Mode and Stack Management
STEP 4
Cisco 500 Series Stackable Managed Switch Administration Guide
-
Neighbor—Name of the neighbor stack unit.
•
Stack Connection 2—Information for the second stack connection:
-
Port—The name of the port that is connected.
-
Speed—The speed of the port that is connected.
-
Neighbor—Unit ID of the neighbor stack unit.
The configurable parameters for the units in a stack are as follows (applicable after
reboot):
•
Stack Unit Mode—The stack mode (Native Stacking or Standalone) of the
unit after reboot.
•
Stack Unit Number—The unit ID of the unit after reboot. The following
options are available:
-
Auto—The unit ID of the unit is automatically assigned by the master of
the stack.
-
1,2,3,4—The unit ID of the unit is manually assigned to either 1, 2, 3 or 4.
-
1 — Force Master—The unit ID of the unit is manually assigned to 1 and
the unit is forced to take on the master role after reboot.
-
2 — Force Master—The unit ID of the unit is manually assigned to 2 and
the unit is forced to take on the master role after reboot.
•
Stack Ports—The pair of ports that are to be used to link units in the stack,
if the unit is to remain in Native Stacking mode after reboot.
•
Stack Port Speed—The speed of the network ports for connecting to
neighbor units in the stack after reboot.
Click Apply and Reboot to reboot the device with the new settings.
5
78