Lldp And Cdp - Cisco 500 series Administration Manual

Stackable managed switch
Hide thumbs Also See for 500 series:
Table of Contents

Advertisement

Configuring Discovery

LLDP and CDP

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
NOTE
LLDP and CDP
Cisco 500 Series Stackable Managed Switch Administration Guide
To configure Bonjour when the switch is in Layer 3 system mode:
Click Administration > Discovery - Bonjour. The
Select Enable to enable Bonjour discovery globally.
Click Apply to update the Running Configuration file.
To enable Bonjour on an interface, click Add.
Select the interface, and click Apply.
Click Delete to disable Bonjour on an interface (this performs the delete operation
without any additional operation, such as Apply).
LLDP (Link Layer Discovery Protocol) and CDP (Cisco Discovery Protocol) are link
layer protocols for directly-connected LLDP and CDP-capable neighbors to
advertise themselves and their capabilities to each other. By default, the switch
sends an LLDP/CDP advertisement periodically to all its interfaces and terminates
and processes incoming LLDP and CDP packets as required by the protocols. In
LLDP and CDP, advertisements are encoded as TLV (Type, Length, Value) in the
packet.
The following CDP/LLDP configuration notes apply:
CDP/LLDP can be globally enabled or disabled and enabled/disabled per
port. The CDP/LLDP capability of a port is relevant only if CDP/LLDP is
globally enabled.
If CDP/LLDP is globally enabled, the switch filters out incoming CDP/LLDP
packets from ports that are CDP/LLDP-disabled.
If CDP/LLDP is globally disabled, the switch can be configured to discard,
VLAN-aware flooding, or VLAN-unaware flooding of all incoming CDP/LLDP
packets. VLAN-aware flooding floods an incoming CDP/LLDP packet to the
VLAN where the packet is received excluding the ingress port. VLAN-
unaware flooding floods an incoming CDP/LLDP packet to all the ports
excluding the ingress port. The default is to discard CDP/LLDP packets
when CDP/LLDP is globally disabled. You can configure the discard/
flooding of incoming CDP and LLDP packets from the CDP Properties page
and the LLDP Properties page respectively.
Discovery-Bonjour
page opens.
9
114

Advertisement

Table of Contents
loading

Table of Contents