Cisco 500 series Administration Manual page 216

VLAN Management
VLAN Groups
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
To assign a MAC address to a VLAN Group:
Click VLAN Management > VLAN Groups > MAC-Based Groups. The
Based Groups
page is displayed.
Click Add. The Add MAC Based Group
Enter the values for the following fields:
• MAC Address—Enter a MAC address to be assigned to a VLAN group.
This MAC address cannot be assigned to any other VLAN group.
NOTE
• Prefix Mask—Enter one of the following:
- Host—Source host of the MAC address
- Length—Prefix of the MAC address
• Group ID—Enter a user-created VLAN group ID number.
Click Apply. The MAC address is assigned to a VLAN group.
Mapping VLAN Group to VLAN Per Interface
This feature is only available when the switch is in Layer 2 system mode and for
ports/LAGs in General mode.
To assign a MAC-based VLAN group to a VLAN on an interface:
Click VLAN Management > VLAN Groups > MAC-Based Groups to VLAN. The
MAC-Based Groups to VLAN
Add Mapping Group to VLAN
Click Add. The
Enter the values for the following fields:
• Group Type—Displays that the group is MAC-Based.
• Interface—Enter a general interface (port/LAG) through which traffic is
received.
• Group ID—Select a VLAN group, defined in the
• VLAN ID—Select the VLAN to which traffic from the VLAN group is
forwarded.
opens.
page is displayed.
opens.
13
MAC-
MAC-Based Groups .
page
216