Cisco 500 series Administration Manual page 225
Stackable managed switch
Hide thumbs
Also See for 500 series:
- Configuration manual (1140 pages) ,
- Administration manual (653 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
VLAN Management
Voice VLAN
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
Select the Auto Voice VLAN Activation method.
If the device is currently in Telephony OUI mode, you must disable it
NOTE
before you can configure Auto Voice Vlan
Click Apply.
Configure Smartports as described in the
Configure LLDP/CDP as described in the
CDP
sections, respectively.
Enable the Smartport feature on the relevant ports using the Smartport >
Interface Settings page.
Step 7 and Step 8 are optional as they are enabled by default.
NOTE
Workflow2:
To configure the Telephony OUI Method
VLAN Management >
Open the
Voice VLAN to Enable Telephony OUI.
If the device is currently in Auto Voice VLAN mode, you must disable
NOTE
it before you can enable Telephony OUI.
Configure Telephony OUI in the Telephony OUI page.
Configure Telephony OUI VLAN membership for ports in the Telephony OUI
Interface page.
Configuring Voice VLAN
This section describes how to configure voice VLAN. It covers the following
topics:
•
Configuring Voice VLAN Properties
•
Displaying Auto Voice VLAN Settings
•
Configuring Telephony OUI
Common Smartport Tasks
Configuring LLDP
Voice VLAN > Properties page. Set Dynamic
13
section.
and
Configuring
225
Advertisement
Table of Contents
